-
2856mAh | 22.1A CDR | 31.6A @ 80oC cut-off
-
Can be charged at a tested/proven 4.28A rating: Yes, 4.28, as in FOUR POINT TWO EIGHT. It is possible, tested, proven, and approved**
-
NEW NiCo Meld over 10kHz: process increases charging rate to 4.28A (1.5C) compared to standard 0.5C – 1C rates of Li-NMC formulation
-
Utilizing industry-first QSP Li-NMC (4x raw compound wash)
-
Exceeds all previous designs and chemistry results with greater amperage and capacity
-
EPTC (Enhanced Positive Thermal Coefficient): Reduction in Thermal Runaway potential
-
Purpose-built to take on both high amperage and high capacity tasks simultaneously. Now utilizing proprietary structure, top cap, and QSP chemistry in the Li-NMC family. More amps ~ cooler temps ~ even safer.
-
Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
-
Ahead of schedule chem bonding to Li-Mn specifications
-
Phenomenal amperage delivery to drive power demanding devices
-
NEW HT 5-brace embossed top to alleviate impostures from distributing fakes in the industry
-
Many proprietary processes conducted to achieve documented specs
-
3015mAh | 22.1A CDR | 31.5A @ 80oC cut-off
-
Wattage output up 5% to 63W; Amperage up 6.8% to 22.1A CDR; Capacity up 7.4% @ >15A loads
-
Designed to feed power-hungry devices without having to swap batteries every other minute
-
Chemistry enhanced by QSP (quad stripping process), which is proven to deliver greater voltage-sag resistance
-
Exceeds all previous designs and chemistry results with greater amperage and capacity
-
A multitude of processes conducted to achieve documented specs
-
Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
-
Updated Poly Seal: Enhances security of seal & proper operation
-
Anti-Counterfeit ‘Ohm’ embossed top to stop knock-offs/clones
-
NEW Mn bonding process that achieves greater purity: Cycle Life is increased to over 70% nominal average of original capacity
-
NEW QSP NiCo Meld over 10kHz: process increases charging rate to 4.43A from previous 4.25A
-
2547mAh | 25.3A CDR | 35.8A @ 80oC cut-off
-
Can be charged at a tested/proven 3.82A rating: Yes, 3.82, as in THREE POINT EIGHT TWO. It is possible, tested, proven, and approved**
-
Phenomenal amperage delivery to drive power demanding devices
-
The purest form of Li-NMC (Nickel [Ni], Manganese [Mn], Cobalt [Co]) used to date
-
Exceeds all previous designs and chemistry results with greater amperage and capacity
-
EPTC (Enhanced Positive Thermal Coefficient): Reduction in Thermal Runaway potential
-
Updated Poly Seal: Enhances security of seal & proper operation
-
Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
-
Ahead of schedule chem bonding to U-Mn specifications: one of many processes conducted to achieve documented specs
-
NEW chemical stimulation and unity process achieves greater purity: Cycle Life is increased to 69% nominal average of original capacity
-
NEW meld process over 7kHz: results in charge rate capable of 3.82A